Yes, applying a ceramic coat to a car can be beneficial. After undergoing paint correction, the vehicle’s paint will shine better, be protected from UV rays, and have a long-lasting protective coating.
The idea of a ceramic paint coating is to protect your car from as much wear and tear caused by daily use as best as you possibly can. A ceramic paint application not only exceeds protection of a paint sealant, but swirl marks can be removed with paint correction, and produce an amazing shine.
Yes, ceramic coating can be a great solution for protecting the surface of your car. It provides a long-lasting protective layer that is stronger than a paint sealant and offers improved UV protection. A ceramic coating also reduces the amount of brake dust and other contaminants that stick to the car’s surface, while also providing a deep, glossy shine.
Applying a ceramic coat to your car can be beneficial in many ways. It provides a stronger protective layer than a paint sealant, offers improved UV protection, reduces the amount of dirt and contaminants that stick to the car’s surface, and produces a deep, glossy shine. Ceramic coatings also help to reduce the appearance of swirl marks caused by improper washing and drying techniques, and protect paint from UV damage, keeping it looking vibrant.
What are the advantages of ceramic coating?
Ceramic coating is a growing trend thanks to its fantastic properties. It is hydrophobic, meaning it repels water, and will cause water to bead on the car’s surface and slide off. This coating also prevents dirt, mud, snow, and ice from sticking to the car’s paint, which makes it easy to clean. Therefore, the extra layer of protection provided by the ceramic coating will make it much simpler to keep your vehicle clean.
How to ceramic coat a car?
Step 1: Detail the Exterior
One of the most meticulous – and lengthiest – steps of applying ceramic coating is prepping the exterior. A flawless look is essential to making sure that any specks of dust and marks are not visible under the coating.
Although you may think you can skip the preparation process with a brand new car, it is recommended that you don’t because it is highly likely to have residue such as dirt, dust, and adhesive. If you don’t prepare, you will be sorry.
Clean the Exterior
Begin by cleaning the car with Detail Spray and wiping it off with a microfiber cloth to ensure a smooth, residue-free surface.
Decontaminate the paint.
Feel the texture of the paint with your hand. Do you feel any tiny bumps? That’s dirt and debris that is still on the paint and needs to be removed for a proper application. Clay bars and clay mitts can be used to help get rid of this gunk. Spray Adams Polishes Detail Spray on the area you are working on and then glide the clay bar or mitt over the area to remove the dirt and debris. Continue to do this for the whole car.
Remove Scratches (If needed)
If you’re working on a new, never-been-driven car, a light buffing with a finishing product may be enough. However, for used cars that have been around for a while, you’ll need to perform a deep cut and polish to take away any scratches and swirl marks. Follow the instructions on the polishing machine and the products you use for the best results.
Give it a final once over.
Clean any panel gaps of any hidden moisture, then use Adams Polishes prep spray to remove any remaining contaminants and wipe with a clean microfiber cloth. Finally, your vehicle is ready for ceramic coating.
Step 2. Applying the Ceramic Coating
The job is nearly finished – the only thing left to do is apply a glossy ceramic coating with great accuracy. To get the best results, make sure you’re in a room with a temperature of 65 to 75 degrees Fahrenheit.
Wipe On
Shake the bottle vigorously and only use a small amount of Adam’s Polishes Ceramic Coating on your applicator. Spread it across a limited space, such as 3 x 3 feet, in a back-and-forth pattern allowing for a slight overlap. If it glides smoothly you are applying it correctly, but if it drags you should add a few extra drops. You will see a rainbow-like effect as the coating begins to bond to the paint and dry, normally within one to three minutes, with hotter and more humid spots on the lower end of the range. This is called the flash time.
Wipe Off
Rub the spot you’ve just covered in a circular motion gently, leaving no traces behind. Utilize a light or flashlight to ensure the job is flawless before continuing. Do this for the rest of the car. One layer is sufficient enough to maintain a glistening look, however if you want your vehicle to stay cleaner for a longer period of time and make water droplets roll away and avoid minimal scratches, then you should opt for a second layer of wax.
Step 3: Let it Cure.
The ceramic coating may appear to be dry but has not finished curing. It is necessary to keep the surface dry for a minimum of 48 hours post application. Once the 48 hours are up, it is okay to drive and get the coating wet, although it will continue to harden for up to a week.
Step 4: Keep it up
The paint on your car may have been smoothed out on a microscopic level, but it will not stay clean forever. Bird droppings, sap, and the sun’s rays will all take their toll on it. Therefore, you will need to maintain your car with Adams Polishes Graphene Shampoo and CS3 Spray in order to keep it looking its best. This will help ensure that water beads off and that dirt and other substances are quickly removed.
How do I determine the best ceramic coating for my car?
If you’re looking for long-term protection for your vehicle, it’s best to go with a Professional Grade Ceramic Coating. If you want something with a shorter lifespan, then a Consumer Grade Ceramic Coating will suffice. For a middle-ground option, look at Ceramic Coatings that are two to three years in duration.
How to choose a ceramic coating?
If you have done your research and decided that you want the convenience, durability and shine that Ceramic Coatings offer, then Adams Polishes Advanced Ceramic Coating is the best option for vehicles in Oklahoma due to its ability to handle the weather. However, for the best results and longest lasting coating, proper preparation of the vehicle is necessary, as well as finding a skilled and experienced installer to put it on properly.
If you want to make your car shine with a deep wet gloss, you might need to do some Paint Correction or Polishing to get rid of marring, swirl marks, or scratches prior to applying a Ceramic Coating. In some cases, newer cars can look great with very little Paint Correction.
When making a decision about which type of Ceramic Coating to use, we will ask questions about how long you plan to keep the car and what your expectations are for the appearance of the car. Consumer Grade Ceramic Coatings (Ceramic Pro, CQuartz, Gtechniq) can be a good option for those who want any protection to save time and money and not obsess over the little details. For those who want the best protection that money can buy and are looking for a deep shine and durability, Professional Grade Ceramic Coatings such as Adams Polishes Advanced Ceramic Coating can provide this.
